Navigator Bar

photos 6104 Alarm Panel Photo photos
Station Alarm System
     Noramco makes the Model 6104 Station Alarm System with 12 indicator lights which can be clearly seen across a 40-foot brightly-lit control room. To make sure that the lights are noticed, the 6104 includes a loud pulsating audible tone alert signal. Once the audible alert sounds, the equipment operator may turn the alert tone off. Contact outputs are provided for other equipment such as a data logger to monitor the power input, summary alarm status, and disabling of the alert tone. A lamp test button illuminates all 12 lamps at once to determine if any need to be replaced. If the input power fuse blows, a lamp lights on the fuseholder.
 
Specifications
Dimensions: 12"H x 12"W x 4" D (30.48 x 30.48 x 10.16 cm) for wall or panel mounting
Power: 48 VDC or 24 VDC (specify), positive ground
48 VDC idle current: 39 mA
48 VDC full-alarm current: 0.8 A
24 VDC idle current: 46 mA
24 VDC full-alarm current: 1.4 A
Lamp Brightness: 1.1 candlepower (48 VDC) or 1.6 candlepower (24 VDC)
Lamp Life: 10,000 hours (48 VDC) or 5,000 hours (24 VDC)
Alert tone: 2900 Hz, 70 dB(A) at 2 ft. (0.6 meters), 2 Hz pulse rate
Alarm inputs: normally positive-grounded for alarm state, but may be optionally negative.
Operating Environment: 20-130 degrees F (-7 to +54 degrees C), 0-95% humidity, noncondensing
Connections: to terminal block inside cabinet, accessed by removing and unplugging the front panel.

Station Alarm System Pricing
(Available in one standard model)
Price: $ 1,050

(Prices from 1/2004 price list; contact for current pricing.)


Noramco Home Page | High Voltage Isolation Units | Alarm Panel
Power Supplies | Power Distribution Panels | Attenuator Panels